Marble staircases with curves, lighting and contrasting tones
A selection of curved flights, integrated lighting and both light and dark marble used in staircase designs.
View portfolio →NATURAL STONE STAIRS · KYIV
Custom Natural Stone Stairs in Kyiv
We design, fabricate and install interior and exterior stairs in marble, granite, quartzite and travertine, coordinating geometry, edge details and interfaces with the actual structure.
Accurate measurement and templatesSurface and finish selectionFabrication and installation
STAIR COLLECTION
Choose a stair solution
Open a card to review the material, tread form, edge treatment and overall visual character.
VERIFIED STAIRS AND PROJECTS
RoyalStone stairs in completed interiors and buildings
Only published projects with confirmed images and factual details about the material, location and completed scope are shown here.
Red marble interior composition
An arch, kitchen island and staircase form an expressive composition in deep red marble, showing the material across vertical and horizontal surfaces.
View portfolio →
Patagonia quartzite in kitchen and exterior applications
A kitchen island, barbecue area and exterior staircase show the dramatic Patagonia quartzite pattern indoors and outdoors.
View portfolio →STAIRS FOR THE ACTUAL GEOMETRY
Marble and granite stairs: treads, risers, landings and installation
Before selecting stone we record the number and geometry of steps, landings, turns, substrate and finished levels. Material, thickness, edge, pattern and installation are therefore tied to the actual stair flight rather than approximate dimensions.
Marble stairs
For statement interior flights, halls and private interiors where natural pattern, vein coordination and a coherent tread-and-landing composition are important.
We select the actual slab, pattern direction, finish, edge and layout before cutting.Marble for stairs →
Granite stairs
For entrance groups, exterior flights and high-traffic areas where durability, stable geometry and a safe surface finish are the priority.
We check frost resistance, thickness, texture, slip-resistant treatment, edges and installation conditions.Granite for stairs →
Treads, risers and landings
For straight, winder, curved and complex flights we coordinate tread depth, rise, risers, landings, skirting, visible edges and transitions to adjacent floors.
Before fabrication we lock actual geometry, thicknesses, projections, joints, edge treatment and installation sequence.Geometry and edge →
SOLUTIONS BY STAIR TYPE
The staircase is engineered around geometry, traffic and operating conditions
Before selecting stone we define the flight type, substrate, finished levels, traffic, balustrade position and whether the staircase is interior or exterior. These conditions drive component format, finish and installation.
Interior staircase in a private home
Treads, risers, landings, skirtings, pattern direction and transitions to the floors at both levels are coordinated as one system.
Entrance and exterior stairs
We review the actual stone for outdoor suitability, drainage, falls, slip-resistant finish, joints and protection of exposed edges.
Office, hotel or restaurant
Heavy traffic, cleaning, repairability, safe edge details and a staged installation programme are considered for operational spaces.
Winders, radii and complex flights
Geometry is transferred into templates and drawings, while stone movement, joints and component sequence are approved before cutting.
Send photographs, a drawing or the tread count so we can define the information required for a technical review.
Request an initial estimateSTAIR MATERIALS
Stone is selected around load, location and design
We consider interior or exterior use, traffic, moisture, frost, slip resistance, component size and maintenance.
Marble
Expressive veining for formal interior stairs, entrance halls and private residences.
Requires an appropriate finish, protection and attentive maintenance.→Granite
A durable practical stone for heavy traffic, entrances and exterior stairs.
Textured slip-resistant finishes are preferred outdoors.→Quartzite
Premium natural movement and strong performance for statement stair compositions.
Properties are assessed for the actual stone type and slab.→Travertine
A warm architectural texture for calm interiors, landings and stair zones.
Pore filling and finish are selected for the use conditions.→Porcelain stoneware
An engineered alternative with stable formats for contemporary stairs and cladding.
It is not natural stone; details follow the manufacturer’s system.→GEOMETRY, EDGES AND CONTROLLED INSTALLATION
The stair is designed as one coordinated system
Stone components must respond to the finished substrate, flight geometry, loads, balustrade, lighting and everyday use.
Substrate and flight geometry
We verify riser heights, tread depths, substrate flatness, turns, curves and installation sequence.
Treads and risers
Thickness, overhang, visible edges, built-up construction and joints between horizontal and vertical pieces are documented.
Landings and winders
Large, tapered and curved pieces are laid out before cutting, with the delivery route considered.
Edge and slip-resistant finish
Square edges, bevels, radii, grooves or textured finishes are selected around design and use conditions.
Skirting and interfaces
Walls, skirting, handrails, door openings and adjoining finishes are coordinated into clean serviceable details.
Lighting, joints and installation
Cables, profiles, movement joints, adhesives, sealants and service access are coordinated in advance.
CONTROL BEFORE FABRICATION
The estimate and fabrication are tied to measured geometry and the actual stone
Before cutting we record the parameters that affect safety, pattern continuity, joints and installation. This reduces rework between survey, fabrication and site.
Measured flight geometry
Every rise, going, landing, angle, radius, wall and finished level at the top and bottom is checked.
Actual slab and sequence
Stone movement is laid out across treads and landings, with vein direction, visible edges and acceptable joints recorded.
Surface and slip strategy
Polished, honed or textured finishes, grooves or inserts are selected around location and expected traffic.
Edges, risers and junctions
Thicknesses, projections, laminated details, bevels, radii, skirtings, interfaces and movement joints are fixed in the drawing.
Balustrade, lighting and adjacent trades
Glass or metal fixing points, cables, profiles, door openings and wall finishes are coordinated before components enter fabrication.
Logistics, installation and handover
Handling route, interior protection, installation order, fitting, sealing, cleaning and final checks are planned as one scope.
Adjacent details best coordinated with the staircase
A staircase is part of the wider interior: floor transitions, wall cladding and future stone restoration are best considered together.
ESTIMATE
What determines the cost of stone stairs
The estimate follows a review of the substrate, geometry, component count, actual material, edge treatment, lifting and installation.
Material and usable yield
Slab value, pattern selection, blank sizes, fitting allowance and cutting waste.
Component count and geometry
Straight, curved and winder treads, landings, risers, skirting and exposed-side cladding.
Surface and edge treatment
Polishing, honing, flaming, bush-hammering, grooves, bevels, radii and complex profiles.
Logistics and installation
Templates, delivery, floor level, lifting, interior protection, substrate preparation, installation and sealing.
FROM MEASUREMENT TO COMPLETED STAIRS01 02 03 04 05 06
The RoyalStone stair process
Consultation
We review photographs, drawings or visualisations and clarify the stair type, material and use conditions.
Substrate measurement
Actual flight geometry, heights, depths, landings, turns, walls and installation access are checked.
Material selection
Specific slabs are presented and the pattern, surface finish and anti-slip solution are agreed.
Drawings and layout
Every component, thickness, edge, joint, skirting detail, interface and installation sequence is documented.
Fabrication
Components are cut, calibrated, edged, grooved, polished and checked as a complete set.
Delivery and installation
Components are delivered, the property is protected, pieces are fitted, installed, sealed and inspected.
MEASUREMENT PREPARATION
What should be ready for the final measurement
A plan, photographs and approximate dimensions are enough for an initial estimate. Final measurement takes place after the structural substrate and key adjoining elements are defined.
Completed structural substrate
The concrete or steel flight should be complete, stable and accessible for a geometry check.
Finished floor levels
Lower and upper floor levels and the thickness of adjoining finishes must be established.
Walls and door openings
Plaster, cladding, doors and other interfaces must be reflected in the final dimensions.
Balustrade and handrails
Fixing points for glass, metal or balusters are coordinated before the stone components are fabricated.
Lighting and cables
Profiles, power supplies, channels and service access are defined before templates and cutting.
Delivery route
Doors, turns, stairwells, lifts and floor level determine component size and installation order.
KYIV AND THE KYIV REGION
Measurement and installation at the property
We work in private houses, apartments, offices, restaurants, hotels and public interiors across Kyiv and the Kyiv Region. An initial estimate can be prepared remotely from photographs or drawings.
Measurement and geometry checkDelivery of stone componentsInstallation and final fitting
FREQUENTLY ASKED QUESTIONS
What to know before ordering stone stairs
How much do natural stone stairs cost?
Cost depends on the actual material, number and geometry of treads, landings, risers, edge and surface treatment, substrate condition, delivery and installation. Photographs and approximate dimensions are enough for an initial estimate.
Which stone is best for stairs?
Textured granite is often selected for heavy traffic and exterior use. Marble or quartzite may suit formal interiors. The final recommendation depends on the actual stone and use conditions.
Can an existing concrete stair be clad in stone?
Yes, provided the substrate is stable, sufficiently accurate and allows the required build-up. Actual dimensions and floor levels are checked before fabrication.
How can stone treads be made less slippery?
Honed or textured finishes, anti-slip grooves or specialist inserts may be used. The solution is selected for the material, location and expected traffic.
When should final measurement take place?
After the structural flight is complete and finished floor levels, walls, doors, balustrade and lighting are defined. Earlier dimensions are suitable only for an initial estimate.
Can you fabricate curved and winder treads?
Yes. Their geometry is captured with templates or accurate drawings, while pattern layout and joints are agreed before cutting.
Can stair lighting be integrated?
Yes, provided profiles, cables, power supplies and service access are designed in advance. Stone components are fabricated around the approved detail.
How long do fabrication and installation take?
Timing depends on the material, component count, edge complexity, substrate readiness and logistics. The programme is agreed after measurement, stone selection and drawing approval.
Does RoyalStone work across the Kyiv Region?
Yes. Measurement, delivery and installation are available across Kyiv and the Kyiv Region, subject to route, floor level, access and component dimensions.
PROJECT ESTIMATE
Ready to estimate your stairs?
Send photographs or drawings, approximate dimensions, the number of treads and material preferences. We will prepare an initial estimate and agree the next step.
- Initial estimate from photographs
- Material and surface selection
- Measurement and installation across Kyiv and the region