Classical interior with marble floor, fireplace and kitchen
A decorative floor medallion, fireplace surround and kitchen countertop are coordinated in a classical interior focused on ornament and symmetry.
View portfolio →NATURAL STONE FLOORS · KYIV
Custom Natural Stone Floors in Kyiv
We design, fabricate and install marble, granite, quartzite and travertine floors. Tile format, pattern, joints, substrate, levels, underfloor heating, finish and maintenance are coordinated as one system.
Stone layout before cuttingAccurate levels and technical jointsInstallation and final finishing
STONE FLOOR COLLECTION
Choose the stone and floor format
Open a card to review the pattern, tile format, surface finish and potential use in a private or commercial interior.
REAL INTERIORS
RoyalStone floors in completed projects
Only projects with confirmed images and factual material, format, finish and scope details are published.
Marble in restaurant and representative interiors
A bar counter, floor and restaurant tables demonstrate different ways to use marble in commercial interiors.
View portfolio →SOLUTIONS BY PROJECT SCENARIO
The floor is engineered around real traffic, space and operating conditions
The same stone can require a different format, finish, substrate and installation system. We define the room scenario first, then select the stone and construction approach.
Private home or apartment
We coordinate axes between rooms, pattern direction, transitions to timber or tile, skirtings, thresholds and finished levels.
Hall, living room and open plan
A large floor field is treated as one composition: slab module, vein direction, symmetry, decorative inserts and visible joints.
Bathroom, spa and wet areas
Waterproofing, falls, drains, surface finish, slip conditions, sealing and junctions are reviewed as a separate technical package.
Restaurant, office or showroom
We consider foot traffic, cleaning routines, local loads, repairability and an installation sequence suitable for an operating site.
Send a plan and area so we can identify the information needed for a technical review.
Request an initial estimateFLOOR MATERIALS
Material is selected for traffic, finish and maintenance
Colour and pattern are only part of the decision. Hardness, porosity, slip resistance, format, repairability, underfloor-heating compatibility and the use of the room are considered.
Marble
A premium expressive floor for halls, living rooms, bathrooms and representative spaces.
Requires the right finish, protection from acids and a considered maintenance routine.→Granite
A strong material for busy areas, entrances, corridors, landings and commercial interiors.
The finish is selected for traffic, cleaning and slip-resistance requirements.→Quartzite
Natural stone with deep pattern and strong performance for contemporary interiors.
Properties and finish are assessed from the actual batch and sample.→Travertine
A warm natural texture for calm interiors, halls, terraces and soft architectural schemes.
Pore filling, finish and protective treatment are specified for the intended use.→Porcelain stoneware
An engineered alternative for large formats, consistent colour and complex zones.
It is not natural stone; substrate, adhesive, joints and movement details follow the manufacturer system.→NATURAL STONE FLOOR FORMATS
Marble and granite floors: tile modules, large formats and layout
The same stone can be used as a repeatable tile module or as pieces cut from slabs for a specific room. Before quoting we define format, thickness, finish, pattern, joints and substrate rather than relying on a generic price per square metre.
Marble flooring
For halls, living spaces, bathrooms and representative interiors where pattern, symmetry and decorative layout matter.
We agree the actual marble, tile module, surface finish and care requirements.Marble for floors →Granite flooring
For entrances, corridors, commercial zones and high-traffic spaces where durability and practical maintenance are priorities.
The finish is selected around slip behaviour, cleaning and the actual load.Granite for floors →Tiles and large formats
A floor can use a repeatable module or larger pieces cut around room axes, veining, borders and transitions.
The cutting layout, trims, joints and interfaces are planned before fabrication.Technical layout →SUBSTRATE, LAYOUT AND INSTALLATION
A stone floor begins with correct levels and a technical layout
Stone is part of the complete floor build-up. Substrate, layer thicknesses, tile format, vein direction, joints, junctions, heating, finish and installation sequence are coordinated before fabrication.
Substrate and flatness
Strength, moisture, screed geometry, permissible variation and readiness for the installation system are checked.
Format and layout
Tile module, room axes, cuts, symmetry, vein direction and transitions between rooms are planned.
Joints and movement details
Installation joints, perimeter gaps, movement joints and transitions to other finishes are documented.
Underfloor heating
Heating system, temperature limits, uniform warming, adhesive and movement accommodation are coordinated.
Finish and slip resistance
Polished, honed, brushed or textured finishes are selected for moisture, traffic and cleaning conditions.
Skirtings, thresholds and steps
Visible edges, skirtings, thresholds, grilles, access panels, transitions, doors and furniture junctions are detailed.
COMMERCIAL AND TECHNICAL CONTROL
The estimate is tied to the actual material, approved layout and defined scope of work
The goal is to keep the visual concept, drawing, fabrication and installation aligned. Critical parameters are recorded before the stone is cut.
Actual slab or batch
We review available stone, real pattern, tone, format, visible defects and usable yield.
Layout before fabrication
Axes, pattern direction, cuts, transitions, visible joints and decorative elements are recorded before production.
Substrate readiness
Flatness, moisture, finished levels, adjacent coverings and underfloor-heating parameters are checked.
Finish and operation
Surface treatment is selected around slip conditions, soiling, maintenance routines and future restoration.
Estimate and logistics
Material, fabrication, preparation, delivery, lifting, installation and finishing are separated into a clear scope.
Installation and handover
Plane, joints, junctions, cleaning and the agreed final finish are checked before handover.
Adjacent solutions for one coordinated interior
Stone floors often meet staircases, wall cladding and large-format porcelain. These junctions are best coordinated within one project.
ESTIMATE
What determines the cost of a stone floor
The estimate depends on material, format, pattern, finish, area, substrate preparation, cuts, skirtings, joints, logistics and installation.
Stone and usable yield
Material value, calibration, tile format, pattern selection, allowance, cuts and remnants.
Geometry and layout
Number of rooms, axes, diagonals, bookmatch, borders, medallions, transitions and complex outlines.
Substrate and installation system
Screed preparation, levelling, waterproofing, adhesive, reinforcement, heating, joints and sealing.
Finish and logistics
Polishing or honing, skirtings, delivery, lifting, interior protection, installation and final cleaning.
FROM PLAN TO COMPLETED FLOOR01 02 03 04 05 06
RoyalStone floor project stages
Consultation
We receive the plan, area, visualisation and requirements for material, format, finish and use.
Material selection
Actual slabs or tiles are reviewed for pattern, calibration, format availability and suitability.
Survey and substrate check
Geometry, levels, doors, stairs, thresholds, services, heating, wet areas and access are recorded.
Drawing and layout
Axes, module, vein direction, cuts, joints, junctions, skirtings and installation sequence are approved.
Fabrication and preparation
Stone is cut, calibrated, edged, marked and packed with any decorative elements.
Installation and finish
Stone is installed, plane and joints are controlled, skirtings and sealing are completed, followed by cleaning and the specified finish.
SITE READINESS
What should be ready for the final survey
A plan and area are enough for an initial estimate. The final layout requires the screed, finished levels, doors, stairs, heating, adjoining finishes and built-in elements to be defined.
Screed and finished levels
The substrate must be accessible for flatness, strength, moisture and actual-level checks.
Doors and adjoining finishes
Door frames, thresholds, timber, tile, carpet and transitions between zones must be known.
Heating and services
Heating circuits, sensors, drains, grilles, access panels, channels and built-in components are recorded.
Walls, columns and stairs
Vertical geometry and stair junctions should be stable and agreed.
Skirtings and decorative elements
Height, profile, corners, door surrounds, borders, inserts and medallions are defined.
Delivery and storage
Vehicle access, lift, stairs, floor level, unloading, dry storage and protection of finished surfaces are checked.
KYIV AND KYIV REGION
Survey, delivery and stone-floor installation on site
We work in private homes, apartments, restaurants, hotels, offices and commercial spaces across Kyiv and the region. An initial estimate can be prepared from a plan, area and visualisation.
Survey and technical layoutDelivery and marked componentsInstallation, joints and final finishing
FREQUENT QUESTIONS
What to know before ordering a natural stone floor
How much does a natural stone floor cost?
Cost depends on material, area, format, pattern, finish, substrate preparation, cuts, skirtings, delivery and installation. A plan and area are enough for an initial estimate.
Which stone is best for a floor?
The choice depends on traffic, moisture, slip resistance, maintenance and design. Granite or a suitable quartzite are often considered for busy zones, while marble and travertine require more considered care.
Can stone be installed over underfloor heating?
Yes, when the heating system, substrate, adhesive, joints and temperature regime are coordinated before installation. Commissioning should follow the system specification.
Which finish is safer in wet areas?
Slip resistance depends on the stone and finish. Honed, textured or purpose-designed anti-slip surfaces are commonly considered for bathrooms, entrances and terraces.
Are joints required between stone tiles?
Yes. Their width and position depend on format, geometry, substrate, heating and building movement details.
When should the final survey take place?
After the screed and finished levels, doors, stairs, adjoining finishes, heating circuits, drains and built-in elements are defined.
Can a marble floor be restored later?
Professional cleaning, grinding, polishing or honing may be possible depending on the stone, thickness, damage and previous coatings.
How should natural stone be maintained?
Use a neutral stone cleaner and soft equipment, and remove contamination promptly. Acidic or abrasive products should not be used without professional advice.
Does RoyalStone work across the Kyiv region?
Yes. Survey, material selection, fabrication, delivery, installation and final finishing are available across Kyiv and the Kyiv region.
PROJECT ESTIMATE
Ready to estimate a natural stone floor?
Send a plan, area, visualisation and preferences for material and finish. We will explain the information required for an initial proposal and final layout.
- Initial estimate from a plan
- Actual stone selection
- Installation across Kyiv and the region